Max. Pressure - 4,000 psi (275 bar)
Max Temperature - 60 C
Inlet - 1/4" plug
Flow - Up to 14 L/min
Bottle Volume - 1L
Using a water blaster to directly clean dirty equipment, machinery and vehicles can cause built up dirt to actually blast and damage the paintwork. Allowing the item to pre-soak in soap and foam helps to soften the dirt making it easier to remove.
Attach this unit to the end of your water blaster gun and fill the 1L bottle with detergent or degreaser solution. The design uses the high pressure stream to introduce air and agitation which creates a thick clinging foam that is perfect for pre-cleaning soaks. The spray pattern on these units is variable and can be adjusted to best suit your application.
Foam detergent and degreaser soaks are also excellent for cutting through grease and grime and after a period, simply rinse off or pressure wash difficult areas.
The units are well constructed and suitable for heavy duty industrial washers up to 4,000 psi. Attaching this unit to the end of you pressure gun means you can spray detergents, degreaser and disinfectants without the chemical going through your washers pump.
